75mm Screws for light steel with a 19mm bonded washer (Pack of 100)
$16.32
$20.40
Unconditional Satisfaction Guarantee- No Shipping Fees Above 30
- 2 Months to Decide. Returns Simplified.
50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.TEK screws with a self-drilling fix, are designed for fixing sheets to Light Steel. The TEK screws are manufactured with a 5/16th hexagonal head and a 19mm bonded sealing washer to ensure they are watertight and secure.
Please note images may vary from actual item supplied due to lighting variations and camera angles.
Important:Alwaysevenlyspace your screw fixings across roofing sheets.Do not over-tighten or under-tighten your screws as this can affect the performance of the washer and prevent it from sealing correctly.
32/1000 sheets– Use 22mm stitching screws to fix flashings/sheets to other sheets.We recommend using TF32-S19 screws to fix the sheets on to purlins.
34/1000 sheets– Again, use 22mm stitching screws to fix flashings/sheets to other sheets.We recommend using TF32-S19 screws to fix the sheets on to purlins.Screws should be no more than 400mm apart when securing the flashing
13/3sheets– Use 65mm BAZ TEK Screws which are self-drilling and self-sealing.When fixing your 13/3 corrugated sheeting, it’simperativethey are fixed at the crest point.Colour caps can be used to match or contrast with the roof sheeting you are using. This is an effective way of hiding the silver screws from view. Stitcher screws at 22mm are advised for securing flashings in place
41/1000 sheets– We recommend using 22mm TF32-S19screws which are self-drilling and self-sealing.Colour caps can be used to match or contrast with the roof sheeting you are using.Purlin spaces for tile sheets need to be 600mm apart.
Ridge Caps-Should befixed using self-drilling TEK-type stitching screws.Each ridge should be overlapped by a minimum of 200mm.
For Flashings– The22mm stitcher screws are advised for securing flashings in place.Screws should be no more than 400mm apart when securing the flashing.