50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.Black Swan’s Swan Wax is a 100% pure wax gasket for setting all floor outlet toilet bowls. The gasket forms a water tight, gas tight and odor tight seal. Fits 3″ and 4″ waste lines. Meets Federal Specification TT-P-1536A.
DIRECTIONS
Be sure the wax ring is at room temperature (about 70 F). If wax ring is too cold a good seal may not be made or the toilet bowl could crack while making the installation.
With the toilet bowl upside down on a protective pad or blanket, place the wax ring around the discharge opening. Press firmly to assure adhesion when the toilet is inverted.
Using the Black Swan’s Stainless or Stay Soft Putty, make a putty ring about 1 inch high around the outside rim of the toilet. This will make a seal between the toilet rim and the floor.
Carefully set the toilet down on bolts and twist bowl slightly to spread wax and putty to make a tight seal. Tighten bolts carefully to prevent breaking the bowl.
